How to
Photograph Interiors - A Beginner's Guide
As most amateur and
professional photographers take a percentage of their pictures
indoors, you’d think we’d all be experts at shooting
interiors. But if there is one encompassing fact about photography
that I have learnt over the years it’s this - the more I
know about photography, the more I realise how clever the human
eye is!
The skill of interior
photography is most often perfected by those who trade as interior
and architectural photographers. Most budding amateur photographers
never give much thought to making a room the subject of a photograph,
even though it could teach them valuable lessons about photography.
As I said above, it’s amazing how difficult it is to just
get the camera to capture an image that represents what’s
seen by the human eye.
So it’s to those people who are keen enough to do it as
an exercise that I will target this blog post, and hopefully you’ll
see that with a bit of thought and patience it’s not too
difficult to get some good results.
Choosing a room.
Be careful to select
the most interesting portion of the room to photograph, since
it's virtually impossible to include an entire room in a single
shot. Also be aware of any interesting features in that room that
may be of use to the picture. These may be elements that add interest
in terms of colour or structure, even a contrast in tone.
Equipment.
Obviously you should
be shooting on a wide angle lens, but not a fish-eye. Anything
from 12mm or greater on smaller sensor sized D-SLR’S and
14mm on full frame sensors is fine but the wider the lens the
greater the barrel distortion. If you’re shooting on a compact
just use the widest angle possible. A tripod is often essential
and if you really want to do it right you will also need some
light/flashes and coloured gels.
Overall Views and Detail Shots.
In your initial photographs,
try and avoid having a bright window in the frame, as this can
cause problems with exposure and white-balance. When taking wide
shots to show large parts of the room, it’s useful to turn
on as many lights as possible. If you have a flash that has an
adjustable directional head, then try bouncing the flash off the
ceiling which will create a diffused and more even light.
Once you have done
some general shots of the room why not move in and get some detail
views that show interesting architectural or furnishing features
in isolation.
Don't forget the details.
Angles
and Height
As you look through the viewfinder and tilt the camera up and
down from the ceiling to the floor, watch what happens to the
vertical elements of the picture. You will notice when looking
into the lower corner of a room the perspective in the verticals
becomes convergent. This means they get wider as they get further
away. The opposite convergent verticals can be seen if you look
up to the ceiling through the viewfinder. Both these convergent
or divergent verticals should be avoided. To ensure that the verticals
stay vertical, try and keep the camera completely horizontal.
If your eye is 150cm off the floor and your camera is at the height
of your eye then you should be pointing your camera at a point
on the wall at the same height of 150cm. This ensures the proper
vertical perspective. It’s easier to try it than to explain
it!
Don’t be afraid to shoot portraits as well as landscapes
- just because most rooms are landscape in proportion, doesn’t
mean the photographer can only shoot that way. Often portrait
photographs are more interesting.
Resist the temptation to stand on a chair in the corner of a room
unless you want the image to look like footage from a security
camera. Most interior photographers shoot around head height or
just above ground level which can give a different feel to an
image.
De-clutter
If the room is looking
very busy you could always tidy up. Often if the room actually
looks like someone lives there, then it’s definitely too
cluttered – meaning the image may turn out messy and unstructured.
Move the pillows off the sofa, and move/hide one or two ornaments.
Hide the telephone, calendar and magazines…..you get the
idea!
Lighting
If you want to splash out £15.00, I would suggest you purchase
a grey card…((see other blog post)))))…this will enable
you to get your camera’s custom white-balance set correctly
for that room. You basically photograph the grey card and then
set your camera to ‘custom’ white-balance specifying
that image as a ‘test card’. This is actually very
straight forward to do with most D-SLRs once you’ve read
your manual. If you are reluctant to spend the money you should
experiment with using a white sheet of paper as a grey card. It
can be extremely effective.
 |
Often tungsten and
low energy bulbs give a very orange light so unless you turn your
flash off you get a horrible mix of white bits that are close
to the flash, and darker areas that are orange. To avoid this,
it’s best to turn the flash off completely to begin with.
This doesn’t get rid of the white-balance issue all together,
as not only do different interior light exhibit different white-balance
characteristics, but once natural light from a window is introduced
then you can have three different light sources with three different
white-balance values. If you manage to eliminate at least one
of those then you at least have a fighting chance.
This is why it is
initially maybe easier to shoot the room with no electric light,
just using natural light if it has a suitably-sized window. Alternatively
to negate the issue of daylight and conflicting white-balance
coming through the window, you may want to shoot at dusk or night
time.
I find the best way to light a space is to try and replicate how
the human eye sees it. This often means using coloured gels on
three or four remotely-triggered flashes that give even illumination
to match the white-balance of the interior lighting scheme.
If you’re shooting on a compact camera with flash, then
I recommend you switch the flash off and use a tripod with the
camera’s self timer. If you have a D-SLR and a decent flash
(sorry but the pop-up jobs don’t count), then you can try
bouncing flash off the ceiling and even using a radio trigger
to trigger the flash remotely. Bearing in mind that most interior
lighting is a horrible orange in white-balance terms you may find
that if you gel you flash with a ½ CTO (colour temperature
orange) gel then your flash matches the white-balance of the lighting.
This means that the overall white-balance is the same, so the
camera can easily correct for it and ultimately you get a better
picture in which the whites are white.
Often the window in your images will be overexposed and blow out.
This is because there is more light coming through the window
than the lights in the room can provide. If you have a decent
flash or set of lights, you can try to balance the window light
to give a more realistic feel. Failing that, you could wait for
a duller day, or for the sun to dip down over the horizon.
Styles:
As with food and fashion
photography, styles are changing all the time - the current trend
being towards natural looking interiors. Keep up to date with
styles by looking at interior design magazines and architecture
journals. Even the Sunday newspapers and magazines can give you
a fair idea of what is currently fashionable.
These are just a few tips and basically only scratch the surface,
but if you plough your way through the above details it will improve
your overall understanding of photography, both indoor and out.
Learning how to get good interior shots of a room is a great encapsulation
of the technical skills required to be a professional photographer.
You must understand exposure, lighting, white-balance, composition,
contrast, colour, texture and above all discipline.
Thank for reading….
Please link to this post to share the knowledge
|